Questions & Answers for: lower spray arm nut seems

lower spray arm Dishwasher model GU3600XTSSB1, I can't remove the lower spray arm. There is a large plastic screw in the center that appears to be the only means of removing the arm, but it seems that

...lower spray arm by removing the center plastic nut, check screws (torx) on outside edge of pump. Tighten these as necessary, mine were loose causing water to spray forward against the tub causing ...

...lower spray assembly in order to clean water filter The filter or screen clogs with undissolved soap and other material from the washer. The screen is under the lower spray arm shroud. Hi, There ...

...spray arm in place to get to the filter. How can I remove that nut and the spray arm? try a large cresent wrenck,or channel lock plier.ps.might place towel over plastic nut,to protect from wrench ...

...lower control arm on my Montero 1992. the bolts are stuck Try soaking the bolt(s) in penetrating fluid for a few hours and reapply if necessary..... ...

...lower spray arm).  it has an "inner" metal nut and a larger plastic nut surrounding it.    I have put wrenches on these but they seem stuck so i do not want to force it.  Our ...

...lower spray arm back on and tighten its VERY wobbly...I am not doing something correct in the last few steps...nut, plastic washer, feed tube cap & wash arm...please help I did the same exact ...

...lower spray arm back on. How do you do it? There is a little plastic thumbscrew- wing nut thing in the center of the spray arm. This meets with a female coupler that sits inside the plastic arm ...

...lower spray arm still seems to turn/spray but no movement or water coming out of uppoer spray arm. We took apart the lines to see if there was blockage -- none. no action on upper spray arm, upper ...

...lower nozle arm comes off during cycle and gets stuck on lower basket hindering it from turning, dishes not getting cleaned Check under screen the retention nut for the spray arm must have come ...