Questions & Answers for: low flow intex saltwater system

low water flow Light comes and says low water flow for my Krystal clear saltwater system. Low water flow is generally and indication that the filter is dirty / clogged. Remove the filter cartridge and

...low flow. It is all new equipment and I know it is all hooked up correctly. make sure its not installed backwards, the flow tube that is. if that doesnt fix the problem make sure that there is no air ...

low flow indicator cam one. I rinsed out the brand new filter and it started back up fine. A few more hours and it's back to low flow. I take the filter out and the flow is fine. Put the filter in and

...low flow and it fills like a low flow when I put my hand over the side where the water goes back into the pool. I've cleaned the hoses. I've taken out the part that is suppose to get build up ...

low flow light will not go off. green light will come on for about 10 mins. changed filter, cleaned flow sensor, checked hoses..... If you already checked the flow sensor as described on this ...

...clear. But..... If you don't clean the unit and let it alarm for low flow, low salt or not run the unit log enough, you WILL HAVE GREEN WATER!!! Hope this helps, If it does, please rate the

...Low water flow through the unit, Low Salt level in the pool water, High salt level in the pool water. If any of these conditions exist, the system will sound a buzzer, and flash a digital code on the ...

low flow? I just bought a Summer Escapes Pro Series 20x48 pool. I didn't realize it was not Intex saltwater system compatible until I had the pool already filling with water and it was too late to

...low flow or low salt springs to mind) but Intex supply all of their manuals online (we've had to reprint once or twice!) at ...

...low pump flow even after i connected a new filter pump, checked the flow sensor and cleaned the titanium i have called intex 2 times and tried everything they suggested with no success. are your ...