Question about 2001 YZF-R1
low beam. Instead of having the RELAY, It was bridged witha wire cable. I rode the bike for about a week and then the lights just went out. I already put in a New RELAY but still the lights don't come
...Yamaha r1 2008 engine overheating I changed the fan, using coolant, changing the bearing but still same Hi, Elcapxy and the usual suspects are: 1. Engine oil level and SAE weight are too low or not ...
...low beam setting then the headlight and wiring are OK but the high beam contact in the relay is no good, (in which case you would replace the relay) or the handlebar switch or the wiring from it to ...
...low beam and high beam head lights do not turn on when I start my bike. The Auxillary lights come on, and the high beam indicator is on but does not change even if I have the switch to low beam. I ...
...R1. Only 1 headlight comes on when on low beams. 2 come on when on high beams. Is this typical? Yes it annoys me also - always looks like one head light blown in my opinion but this is how they are ...
...lights on it, once installed and hooked up i realized one of the small rings didnt work so out they came... now once its put back together and hooked up my headlights wont work....I did notice two ...
...low beam does not Hi, Anonymous you may have a faulty hi / lo beam switch if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight ...
...OEM parts for Yamaha ...
Question about 2000 YZF-R1
...low beam, the fuse is ok. Hi, K you may have a faulty hi / lo beam switch if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight ...
...yamaha R1 check engine light on http://www.lethaladrenalinrydaz.com/index.php/service-manuals/finish/3-service-manuals/6-2007-2008-yamaha-r1-service-manual/0 OEM parts for Yamaha ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions