Questions & Answers for: loud metal clanking noise ford

Question about 2000 Taurus

1 Answer

...at a complete stop. It makes a loud clanking sound while sputtering while idling. well sorry to say that you have a blown head gasket and you need to take it to a shop imediatly and stop driving ...

Ad

loud knocking noise during agitation, louder metal to metal clanking noise when changing from agitate to spin. Reported, service order # 94895278 Jan., 2008. Technician stated normal sounds because of

Ad

...loud noise like metal broken off inside. I thought it was either the CV joint or maybe the flywheel is loose. I had a mechanic at goodyear put it on a lift and as the car was in drive and being ...

Question about 2000 Taurus

1 Answer

loud clanking noise in dishwasher dishwasher fills with water, then when motor starts we get a loud metallic clanking noise, nothing is obstructing the spray wheels, the noise is coming from the motor

...on 2001 Ford Taurus Very loud under hood. Coming from passenger side front (around wheel area). Car starts, drives and acts fine, just for the noise. Does it make this noise when you turn

...loud noise. It is there a low or high speed it is quite possible that you have a bad strut mount, noticeable by rubber moving from metal, or a leaking strut, looking at the strut you would see ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...loud metal to metal noise while trying to start after the water had run in. Clank, Clank, Clank Loyd Hi Loyd. If the metal noise is like rattling, as first thing check the object trap located behind ...

...loud noise, like metel to metel.. so what else could be the problem if its not the belt? could the bolt to the idel pully cause this? it maybe the synchroniser which is under the throttle body (and ...

...and a loud whistle noise when I brake. My friend said my rear brakes are metal to metal. My questions are What does that mean? And what all do I need to replace? most likely brake pads and ...

...metal and when it is cooling there are often metallic noises generated as it shrinks at different rates and the various components move against each other but I have never heard the noises described ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...