Questions & Answers for: loud clunking noise left turn

...loud clunk or noise each time you shift. If really bad then check driveshaft u joints about to let loose. Any shop can give you a quick visual inspection underneath with a lift and be able to ...

had it in to the dealer 3x (1 time I left it a week). They say it is normal. They took me for a ride in another Rav4 that made the same noise. I still don't think it is right, but that is their answer

LOUD CLUNKING NOISE IN REAR WHEEL AREA WHEN TURNING LEFT 98 FORD TAURUS. FRONT WHEEL DRIVE. LOUD CLUNKING NOISE IN THE REAR DRIVERS SIDE TIRE AREA WHEN TURNING LEFT AND SOMETIMES WHEN GOING IN REVERSE

CLUNKING NOISE WAS TOLD ITS A CV JOINT CHECK NO DAMAGE BOTH SIDE REPLACE BOTH BOOTS INNER AND OUTER BOOTS ON BOTH WHEELS AND REPLACE GREASE WITH NEW ONES AND TRY IT OUT AND THE NOISE IS STILL THERE.??

...clunking noise whenever I turn the wheel. What is it? Hi Is it a clunk clunk clunk noise? Then you have a CV joint that needs to be replaced. This is called the CONSTANT VELOCITY JOINT, and helps you ...

...loud clunking noise outside the car when you turn the wheel The noise will be either the universal joint on the steering column or a component in the steering rack or outer tie rod ends, get someone ...

...LOUD CLUNKING" What could be a Loud clunking noise coming from the rear of the forester, at 1st I was told it was a wheel bearing, got that fixed and the clunking noise only happe 98 Forester ...

...loud clunking noise in the rear. The noise is louder when turning left or when I start off or reverse. it sounds like it does ot when it is trying to go in gear or it could have something to do with ...

...loud clunking noise coming from the front end of my 1997 explorer 5.0. It only makes this noise when eccelerating or turn sharply to the left. It is starting to make the noise even when braking but ...

loud clunking, grinding noise while turning to the right only, and ... I moved the passenger side tire to the rear driver side just in case it ... can bad wheel bearing/hub cause loud clunking noises?