Questions & Answers for: GE lost suction

No Air suction into downdraft. I recently purchased this unit and had it installed, I noticed a few days ago that there does not appear to be much air suction into the venting system. The Airflow ...

GE top load washing machine will not spin/suction clothes with normal load tub will spin and water is suctioned from clothes just fine when only a few clothes are washed. With a normal load, however, ...

...Lost Suction The refrigerator side door of this model is not closing properly, causing it to fill with ice and persperation. Can't figure out why. I have a GE Profile Stainless Steel side by side. I ...

No suction for use of crevice tools, running hot, then shut off no suction on hose when using crevice tool, power nozzle seems to work as I can hear sand going up the hose. When I remove the hose and ...

suction stopped working immediately my vacuum is not suctioning at all. it was working last week. it just leaves stripes on the floor. it's bagless but the dist compartment is clean and the floor ...

...lost its suction & no longer freezing! I hear no motor assy that is bad or any other "noises"...pulled the freezer out & see nothing out of the ordinary underneath where the compressor & ...

Reason for inverted suction line above the evaporator My AC instruction book says mounting the evaporator coil above the condensing unit will require an inverted loop in the suction line adjacent or ...

would a clogged hepa filter cause the vacuum to stop picking up dirt? There's suction on the hose when I checked it. Generally the Hepa filter is a bypass filter in which there is another filter on ...

We replaced the drainage hose and now it won't drain. How do we create the suction? The suction is created with the motor. If your motor is not operating properly, the pump will not work. As the motor

Ge side by side not cooling. The compressor runs but not cooling, both fans running and been well defrosted? If you are sure that the compressor is running you might hold the suction line and output ...