Questions & Answers for: losing pressure pool filter

losing pressure 2-3 min vacuum hose is attached to skimmer pool is filtering fine and good pressure out of jets..when vacuum is attached to clean...i lose pressure and have to rebump every 2-3 minutes

...If you have outtake valves post filter (versus intake pre-filter and motor) you could try choking those down to reduce flow back to the pool but maintain pressure through your pump and

...POOL VAC WAS FLOTING *** UP. I CHECKED THE THE REST OF THE EQUIPMENT AND NOTICEN THERE WAS NO PRESSURE ON THE FILTER. IT'S A STA-RITE SYSTEM:3 FILTRATION MODEL#S8S70 sounds like your cleaner may have ...

...pressure going out to the pool. a pool store said it might be air bound .bleed the air out same thing Do you have problems priming the system? If so you may have a suction leak in the plumbing ...

we have a hayward pro grid de filter. while vacuuming we are losing pressure real fast. what could be causing this? Air in line or dirty filter

...losing pressure. Air bubbles are definitely one step, but check these things as well. Check you impeller to see if there is a clog or obstruction. You pump strainer could also be clogged. It could be ...

...pressure. sounds like you have alot of air coming from the pool. check the weir in the skimmer to make sure it's not stuck and blocking water from coming in, assuming the water level in the pool is ...

...pressure goes high Changed the sand, Pool operates normal. Have good flow, good suction, filter pressure at 24 psi. After 5-10 minutes of vacuming, filter pressure rises to 40 with no suction and no ...

pool using Hayward S166t with brand new veri flow pump attached. I back wash and pressure restored is excellent but within 15 or twenty min drops off again. what is the water like? Dirty? Green? Murky

Why did my sand filter tank explode. Pool losing water. Turned out the sand filter multiport blew off and cracked the tank How long had it been since last serviced? Too much pressure