Questions & Answers for: loses channel memory

Ad

Question about HTR500 Receiver

1 Answer

...channel memory and channel volume settings after powering off the receiver How can fix this problem. On remote control before you shut off yor receiver press "TEST" button to save the memory. It will ...

Ad

Question about Digital-to-Analog Converter for Analog TVs

1 Answer

...channel memory. This is normal if you have a rotatable antenna. You need to mark the rotator (or just keep a chart nearby) with the heading for each channel. If you mean you're losing channels from ...

Ad

Question about Digital-to-Analog Converter for Analog TVs

1 Answer

tv loses stored channels when we turn the set off then turn it on again later it loses all the stored channels mains board need replacement, the memory chips are faulty

Question about VW32L 32 in. LCD HDTV

2 Answers

loses channels when shut off. must auto program when turning back on. Your may be in shop mode, I'm not sure if Vizio's have a service menu. Go to setup and go through the install process again, watch

Question about VW32L 32 in. LCD HDTV

1 Answer

...loses channel programming memory 13" GE TV does not remember the channel programming even if NOT disconnected from the 110 volt service. Some times it will not start unless the power cord is pulled ...

Question about VW32L 32 in. LCD HDTV

1 Answer

...loses audio on the 3/2/1 on the aux, dvd channel, intermittent loss of volume help, too good a system to bin thanks could be the memory chip, I used to see this a lot with Panasonic tv's that would ...

...loses all channels again after programing channels in 1 at a time because tv wont auto program them in itself if i turn tv off then back on i lose all channels and have blue screen The main system ...

loses all of its channels when I turn it off. I have to retune everytime I turn the TV back on, Any Ideas welcome, many thanks model X22/14C-GW-TCD-UK All sets use a eprom in some form or another that

Question about TruFlat 27F520T 27" TV

1 Answer

...loses all its channels when the power is turned off so every time i switch it back on it says no signal but when i retune it it works fine and finds all the channels Main system control memory IC ...

When turned off, why does it lose all channels stored in memory? When TV is turned off - tv has strted to lose all the channels. The only way to resolve is to re-tune tv which is obviously not viable ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...