Question about Pressure Washer Trigger Spray Gun 4000 PSI, 8 GPM
...stuck out? If so loosen the recoil assy's bolts and it will snap back once it's loose enough. This usually happen due to bent recoil cover, swelling of the pull rope, or too much pull rope in the ...
...loosen a stuck spark plug on my 2002 Suzuki Vitara? Can I use WD-40? no dont use wd 40 use electric penatrating fluid leave it 5 mins and then gently try and loosen it if u use wd40 u will could seal ...
...stuck and cannot get them out. Some say it's so corroded that they have to be worked free. What do i do? drive car till normal temp is reached. loosen all plugs quickly, but carefully, by ...
...spark plugs. I would begin by removing plugs and cleaning or replacing them depending on the age of them. If he placed cleaner into the oil, you will have to change your oil and filter because the ...
...stuck. Take the spark plug out and spray some carburetor cleaner into the cylinder through the spark plug hole. Then turn the engine over by hand if possible. That may loosen up carbon deposits. Then ...
...stuck what can I use to loosen them up. Try a heavy duty penetrant, like PB Blaster or Kroll, not WD-40. Use a lot, and let it sit overnight. It's the only thing that might help. Then you are just ...
Question about 1991 Lumina
...slides up and down from the seat, If the needle stays up then it's stuck and NOT letting the fuel into the carby, Just pull it down with your fingers to loosen it up..I hope this helps....
Question about 1991 Lumina
...slides up and down from the seat, If the needle stays up then it's stuck and NOT letting the fuel into the carby, Just pull it down with your fingers to loosen it up..I hope this helps....
Question about 1991 Lumina
...stuck and NOT letting the fuel into the carby, Just pull it down with your fingers to loosen it up and spray up the seat with a carby cleaner. Also the link below is a short YouTube video showing the ...
Question about 2006 Freestar
been driven in 3 years. The spark plugs are stuck. How can I loosen them without stopping something? The head is aluminium and the plugs are steel. Heat the head with a torch and the seal will release
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions