Questions & Answers for: loop stitch procedure

stitch bubbles up This is hard to find in the internet so I hope this will solve your problem... Frequently Asked Questions Q) Help! I am breaking a lot of needles and the tension is getting too tight

...for the bobbin does not hold. Eventually the underside of my sewing project gets large, loose loops. I have repeatedly tried to re-adjust it through the on screen menu, but it does not hold. ...

...will pull through and I am able to get it to sew then the bottom thread on the piece I am sewing is loopy. Are there any specifics I need to know. I have the book and have tried the procedures listed ...

Needle only moves a little and then beeps saying needle up when the peddle is pushed. Machine will not run. Good day Po!!! Sewing machine operator can often help themselves when their machine does not

...stitch at the default position.  Different models have different default positions including the most common far left and center positions.  If no problems are perceived in needle bar ...

...stitch" - - -", (6) Looking from top, jiggle the "Reverse" lever, so you can track the linkage to a small cylindrical pin caught within a small "C" lever with an attached wire bail that has an ...

...stitch balanced. Finally when your stitches are perfect. clip the threads at the spools in back. And tie on the coordinating colored thread for your fabric. Get used to this procedure since it is ...