Questions & Answers for: loop cassette tape

will put the EQ in your receiver's tape loop. To hear the EQed signal with all receiver sources you'll need to engage the 'Tape Monitor' button or switch which will route the tape loop to the speakers

...cassette deck Technics RS TR 515, EQ Technics SH GE 70 and sound processor SH Ge 90. Thanks, Genu Each unit (the EQ and the Processor) should have left/right in/out rca jacks as well as L/R tape ...

...loop outside the cassette even once you have been turning for what seems to be an eternity, you can still try to eject the cassette but will need to be extra careful not to crinkle the tape as the ...

...cassette out of the camera that loop of tape has snagged on part of the mechanism and that's what is stopping the cassette from being removed. I'm afraid the tape would be damaged at that spot so you ...

...cassette is ejected the tape loop is not rewound into the cassette. The display shows "ERROR 2" The reel motor, idler or wheel is not winding the tape back onto the spool. What is it? Make. ...

...pushing the tapes, so the tape is looping in. Is this a belt problem or a gear box problem ? How do I fix this ? Thanks Sylvain Soft Touch control for cassette decks are servo drive and uses no

...tape loop of a receiver and then any tape deck displaced from that loop if one was plugged in will be hooked to the tape loo[p on the equalizer. This is a very simple process and one that is often ...

for this. The EQ line in and Line out get hooked into the record out and Tape in of one of the tape loops on the Sansui amp. Record outs go to EQ in and the EQ out goes to tape play

...double cassette deck on nsx-v25. only left spindle turns on both tape 1 and 2. tape loops round wheels It is probably a loose or broken belt. I do not know the unit so this is just a starting

...cassette is inserted the mechanism draws out a loop of tape that must be rewound when eject is pressed. The mechanism is fairly complex and engineers use a special cassette in order to view the ...