Questions & Answers for: logitech harmony 890 blank screen

...Harmony remote with no luck so far as to one that works. The screen is blank on this one (it is backlit, but no words/graphics. Any recommendations? Had same problem. Update software and firmware. It ...

logitech harmony 890 display is blank have 2 harmony 890 remotes. This is the second time the display has gone blank. The buttons still control functions but the display is blank. Luckily have used it

Logitech Harmony remote's LCD screen has gone blank. 1. Remove the battery, press and hold the 'OFF' button, and re-insert the battery. The screen will display 'Safe Mode!', or the 'Activities' button

Logitech Harmony remote's LCD screen has gone blank. 1. Remove the battery, press and hold the 'OFF' button, and re-insert the battery. The screen will display 'Safe Mode!', or the 'Activities' button

Harmony 890 Have blank screen, but remote works. Have removed the battery for several hours, used the firmware upgrade, after starting in safe mode. Any other suggestions? If the screen is still blank

...Logitech Harmony 890 remote. It is charged HI! Here's what to do if your Logitech Harmony remote's LCD screen has gone blank. 1. Remove the battery, press and hold the 'OFF' button, and re-insert the ...

...Logitech Harmony 890 is about 1.5 years old and now has a blank blue screen. Buttons still work, if you remember their assignments. Is this issue common and is it repairable? I had the same problem ...

...logitech harmony 890 remote's screen is blank. it still works fine, but the screen is blue and blank This seems as though it may be a hardware issue. Please try contacting logitech through phone ...

Logitech Harmony remote's LCD screen has gone blank. 1. Remove the battery, press and hold the 'OFF' button, and re-insert the battery. The screen will display 'Safe Mode!', or the 'Activities' button

Harmony 890 and when I contacted Logitech, they told me to do the troubleshooting steps below and I got it working again!!! 1) Remove the battery from the Harmony Remote for 10 seconds and reinsert it