Questions & Answers for: GMC Jimmy location shift solenoid

Ad

Question about 1999 Jimmy

1 Answer

shift to 4WD, stays in 2HI and the light in the 2HI button is on yellow......I hear clicking in the dash but no shifting to 4WD? vacuum leak or vacuum locker solenoid problem. a great way to check for

Ad

...shift solenoid for 97 3.8 liter chry town an country The shift solenoid is a valve that controls shift timing. The solenoid pack is located inside the transmission on top of the valve body. It looks ...

Ad

Question about 1995 Jimmy

1 Answer

...checked the auto fuse #23 and it was ok. Where else can I start to look? IS "shift timing solenoid" different that the A & B Shift solenoid?? If so , where is it located??? Thanks Tom Check it ...

to replace it Thanks bob A shift solenoid is located inside the automatic transmission and you should probably leave that job up to a repair shop that specializes in transmissions. Hope help with this

Question about 1996 Jimmy

1 Answer

where is the shift solenoid located in a 1998 GMC Jimmy cuz it wont shift into overdrive on your front diff its 2'' in diameter 5 '' long with a 5 pin wiring plug on it

...someone said it could be speed sensors. where are they located. Its more than likely a shift solenoid sticky causing this problem.Its located inside the transmission oil pan in the

...shift solenoid circuit (electrical) This code has to deal with the circuit. the wires the harness, and the fuses. The requied tools test light,voltmeter,trouble shooting tree.hopefully its the ...

shift past 2nd gear in 97 gmc jimmy. New transmission. what could be wrong? We replaced the transmission this past august. It drove fine till about a month ago when it stopped shifting past 2nd gear ,

Question about 2000 Jimmy

2 Answers

...Shift solenoid B electrical and I changed both Shift Solenoid A and B and the issues remained the same. Is the issue due to the ignition switch? And is the ignition switch located in the steering ...

I have a 97 Jimmy been haveing ****** shift problems. ****** would'nt shift in to 1st or OD so i replaced both shift solenoids and ran fine for awhile.Now it's doing them same thing think it m

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,327 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,099 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,106 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,080 Questions

2001 GMC Jimmy
2001 GMC Jimmy

819 Questions

Manuals & User Guides

Loading...