Questions & Answers for: location oil sending unit 2

...oil sending unit is generally located on the driver side, center of the engine block near or under the exhaust manifold, or on the front of the block towards the top. Unless they moved them on me, it ...

oil pressure sending unit I need to locate the oil pressure sending unit on a 2004 chevy 8.1 liter vortec engine? Hi there; Your looking foer the oil pressure sensor on the 2004 8.1L. You will find it

Location of oil pressure sending unit on 2003 GMC 4.3L I need to replace the oil pressure sending unit on a used vehicle I recently purchased and would like to know if anyone knows the exact location ...

...MANIFOLD HAS TO BE REMOVED TO GET THE KNOCK SENSOR.HIGH OIL PRESSURE PROBLEMS COULD BE OIL TOO THICK.PRESSURE RELIEF VALVE IS STUCK.MAIN OIL LINE FROM PUMP CLOGGED.OR YOU HAVE FAULTY OIL SENDING

oil pressure sending unit? where is the oil pressure sending unit on a 1996 GMC 4WD Suburban? The oil pressure sending unit is located on the engine block, passenger side by the Distributor. Good luck

oil pressure sending unit oa a 2005 GMC Yukon with a 5.3 engin my 2004 yukon engine oil sensor is at its highest, what is the problem I am not familiar with your specific vehicle but most oil pressure

Trying to find location of oil pressure sending unit for 2004 gmc savana Your best bet is to get the Haynes Repair manual on your vehicle to locate this and make this repair.

...oil pressure sending unit located on the 2004 gmc ,4.8 vortec The Oil Pressure Sending Unit can be found at the top and rear of the engine, behind the back of the Intake Manifold. It is to the left ...

...can't locate the oil pressure sending unit to replace it. I've looked all over but can't seem to pinpoint it Oil pressure senders are just about always located at the oil ...

location of oil pressure sending unit, 2004 GMC Envoy 4.2 6 Cyl the oil pressure sensor should be close to oil filter. two wire connector, wire colors, tan and purple. good luck