...Good Luck! pour fuel in the motor if it fires it could be your ignition control module it grounds your injectors to make them spray and is between 65-100 dollars depending what part houses yoiu ...
where is the pcm located on a 1994 gmc sonoma with vortech v6 auto? The PCM for what ? There are several PCM ( part controle modules) in any given vehicle... Most are integrated in the ECU .
Where are the grounds for the break lights on a 98 gmc sonoma if the light is removable from body ,might have to refit it to get ground through body
Question about 98-04 Jimmy Sonoma Chevy S-10 Blazer 4x4 4wd Transfer Case Control Module
How Do I Test the Fuel Pressure Regulator, on a 98 GMC Jimmy with 4,3L with a fuel pressure tester
Question about 98-04 Jimmy Sonoma Chevy S-10 Blazer 4x4 4wd Transfer Case Control Module
1998 s-10 blazer cranks a long time then starts. Wondering what it could be. Engine cranks a long time before it fires, fires up right away when primed through the throttle body. Fuel pump and filter ...
Question about 98-04 Jimmy Sonoma Chevy S-10 Blazer 4x4 4wd Transfer Case Control Module
My front brakes are locking up on a 1998 Blazer.replaced abs module, front brakes and hoses what could be the problem? Replaced abs module, front rotors, brakes, hoses. Check master ...
...GMC Sonoma My high beam don't work, The combination switch on the steering column operates a relay located under the hood to operate the Hi beams. The body control module controls it's operation
Question about 98-04 Jimmy Sonoma Chevy S-10 Blazer 4x4 4wd Transfer Case Control Module
98 gmc jimmy. It says it's in park, but can roll it back and forth like it's in neutral, turn key and nothing happens and have a full battery. Could it be the neutral safety switch? Can I bypass it to
where is the PCM located on a 2003 GMC Sonoma Powertrain Control Module (PCM) On the right side of the engine compartment
Question about 2003 Sonoma
...everything flickers while truck is idle it a 2000 gmc sonoma what do i do have alternator and battery tested --check belt and wire connections Body Control Module grounds may be loose or corroded
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions