Questions & Answers for: load ribbon error

...ribbon you load!You have to move this now empty core from the back ribbon spindle and slide it on the front ribbon spindle. You then load the new ribbon on the back spindle and attach the ribbon end ...

...load the 4x6 ribbon and close the machine it gives me a "ribbon error" and will not let me print. I opened up the package and used a new ribbon and it gave me this error. I also tried on the other ...

...ribbon remove it, it will ask to load the backing. Remove a label from the backing and let it do its thing, eventually it will ask you to load all. Re-install all the media and it will calibrate, ...

...ribbon on a little to hard and broke the plastic tab that insure it loads correctly. With the tab gone you may get lucky and load it right sometimes and other times not this is why some ribbons work ...

...Load the label backing with the ribbon (2) remove the ribbon - just shove it to the right, out of the way of the ribbon sensor (3) reload the label and ribbon. The printer will run a number of labels ...

...the Versamax brand ribbon although i don't recall what the symbol is on that one. If you are trying to load a spool of Photo ribbon on a color spool that message occurs. Hope this explains

Load a genuine Zebra ribbon and see if error is resolved. If none of that works, turn it off, unplug it from power, turn it on while unplugged. plug it back in and turn it back on and see if the error

...ribbon ymckk printer show error 122? That error usually indicates the ribbon is not loaded properly in the carrier. Please double-check to ensure the spools are inserted in the spaces with the ...

...error message for "ribbon out". This has a few possible causes: 1. Make sure you have the right ribbon for the printer. The standard color (YMCK) ribbon is #084051; if dual-sided, the standard YMCKK ...

...Ribbon: Wrong Material" error message, and further description of: " The print Ribbon is not installed properly or has been damaged.". If you're certain the ribbon & film are loaded properly, and ...