...settings. As to the noise, squeeks and groans emanating from the lam unit usually means mis-loaded lam film. Check the loading of the lam film in the printer and make sure it is not binding
...area. Tilt the printer back to see this area better. 1. Verify the latest driver and firmware is loaded. These are found at this link: http://www.fargosupport.com/ 2. Calibrate both the Ribbon and ...
Question about HDP5000 Thermal Printer
...ribbon #084052; if monochrome/black print only, that is ribbon #084060. 2. Make sure the ribbon is loaded correctly. The spools are color-coded, so make sure the orange on the ribbon spool is in ...
...code 28, it indicates "No Film". That condition can occur when: 1. You do not have transfer film loaded in the left-hand carrier (or it is loaded incorrectly). The transfer films have yellow & ...
Question about HDP5000 Thermal Printer
...Ribbon is not installed properly or has been damaged.". If you're certain the ribbon & film are loaded properly, and in the correct carriers, the next thing to try is a new ribbon and/or new film ...
Usually answered in minutes!
86 Questions
90 Questions
44 Questions
40 Questions
37 Questions