...Ace staple gun 22084 I am having trouble loading staples in my staple gun. It is an Ace 22084 staple gun. I have 5/16" - 8mm staples. I can not figure out how to put the staples into the gun. At the ...
...load staples in my power shot stapler. I can pull the chamber out the back. It looks like I should lay the staples on the chamber, but then it can't close because they are too wide. I am using power ...
Question about Ace Heavy Duty Staple Gun Hammer Tacker
the stapler. If you do not know the correct size for your stapler someone at your local hardware store can help you find the correct size and they will probably even show you how to load it. Good luck
Question about Ace Heavy Duty Staple Gun Hammer Tacker
back in 1982 and for how long after that I dont know. You should however be able to take it to and ace store and they will be able to show you how to load it and what staples it takes. Hope this helps
can't load staples in high capacity stapler ok, i was on vacation for only 3 days and came back to the office to find both of our large capacity staplers messed up. i am trying to load staples but ...
Ace) It came loaded with staples. How do I load nails?? The nails fit one side same place as the staples its usually on right side but may not matter. I hope this helps please rate if the answer helps
...Ace Heavy Duty Staples 3/8" 10mm Narrow Crown Arrow T50 staples but cannot get the arm to load with them on it. Possibly you are trying to load it from the back with the arm out. This way does ...
have a ace hardware electrical staple/nail gun how do I load the brad nails? on the back of gun below the cord red buttons pinch together
Question about Ace & Electric Staple / Nail Gun
How do I load Ace Hardware Model 2111771? I have Ace heavy duty staples 3/8x10mm check other online sites
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions