Questions & Answers for: lionel train transformer wiring

Lionel train power issue We are trying to set up a refurbished lionel train set. We have the copper wires in place and the lockon connected to the tracks but we cannot get the transformer power to ...

...pulled out. The red wire goes to the center terminal, and the black to the outer one. ...

...lionel legacy cab-2 remote i hooked up every thing to the manual but when i turn it on i dont get any track power just unplug the transformer from the grey box (the one with the green light and red ...

...lionel type KW Trainmaster Transformer and the cord to the 110 volt outlet needs to br replaced. How do I remove the terminal cover (there are no screws on the bottom of the transformer to dismantle) ...

lionel train slows down on far side of the track There is bad contact in the track connections. You can sand the track connection sites. Another method is to run another power wire to the other end of

The A terminal of the transformer has no power but the accesory side does Open up the transformer and make sure the terminal has not become disconnected from the power wire. Sometimes from use the ...

...train track? thank, E.S The transformer is a Lionel ZW I have used 18ga lamp wire but you can use wire as thin as telephone wire. My rule of thumb is to use thicker wire (lower gauge number) the more ...

my f3 santa fe only runs in reverse with my 1033 tranformer I think its the 1033 transformer How does it work? try reversing your wires from the transformer to the track.

I need info on how to connect from transformer to track. Ilost paperwork and wires. Power wire to center rail and ground wire to either outside rail.

lionel o guage polar express set transformer has a bell button but don,t work no sound IfIam correct, the basic Polar Express came with just a whistle. There is an optional coal tender that has a ...