linux Problems

3com Air Connect Wireless PCI Network Card 3CRWE777A-E1 in Linux

Sun, 06 Dec 2009 07:16:48 GMT

Hi Do u know is there any driver for 3com Air Connect Wireless PCI Network Card 3CRWE777A-E1 for Linux OS ? This card is PRISM chipset built in? ?Why i Linux Cannot detect it ?

Linux-compatible OEM fingerprint reader

Sun, 06 Dec 2009 07:16:48 GMT

Hi folks, I am currently in the research stage of a (pseudo)embedded device project that uses a fingerprint reader and I am trying to determine whether I can recommend Linux! Does anyone know if an OEM reader exists that either has a...

Orinoco 11b/g Linux driver

Sun, 06 Dec 2009 07:16:48 GMT

I have problem finding drivers for Proxim`s Orinoco 11 b/g PCMCIA card (8470-WD) for Linux. Can someone help me with any links where I could find this drivers ?? Thanks in advance. -- Best Regards Vlad

OLICOM TR16/4 CARD ?

Sun, 06 Dec 2009 07:16:48 GMT

?Currently Linux only supports Token Ring cards based upon the IBM Tropix chipset so I would guess that your card will not work (someone will probably follow on with a 'yes it will' statement soon) I know that the IBM Auto 16/4 TR...

Internal Zip drive on Thinkpad T21 running Linux

Sun, 06 Dec 2009 07:16:48 GMT

I recently bought an IBM Thinkpad T21 running linux, together with IBM's internal Zip drive. I was assured by IBM that this would be fully compatible. However after 3 months of phone calls and emails I have just been told that IBM doesn't...

VIA K8T800 / VIA 8237 mainboard

Sun, 06 Dec 2009 07:16:48 GMT

Can anyone confirm amd64 operation on a VIA K8T800 / VIA 8237 mainboard? The model is a Chaintech SK8T800 socket 754 Micro-ATX. ?It's for a server, so VESA video is good enough. Otherwise, are there other Micro-ATX mainboards known to...

IML pondering (Dan K, quit chasing ambulances!)

Sun, 06 Dec 2009 07:16:48 GMT

OK, we know that IBM FW controllers are limited to 5MB/sec (roughly) when a SCSI controller is on the planar. BUT what if a non-IBM SCSI controller is used? Fer instance, let's use a DAC960M in a Bermuda. You have to boot from the...

Cable problem?

Sun, 06 Dec 2009 07:16:48 GMT

I'm trying to set up a home ethernet network of 2 computers using linux and without using a hub. I know I have to get a cross-over UTP cat 5 cable. But what I would like to know is how can I know the difference between a cross-over cable...

Has anybody installed RH 7.3 on VIA EPIA 5000??

Sun, 06 Dec 2009 07:16:48 GMT

Hello. I'm trying to install RedHat 7.3 on my VIA EPIA 5000. I'm suffering a lot of problems, so perhaps the distribution is the problem. Has anybody installed RH 7.3 on VIA EPIA 5000? Is worth installing Debian?? Regards.

GVC BB0040

Sun, 06 Dec 2009 07:16:48 GMT

I have a GVC BB0040 modem behind a router (Netgear RT314). Anyways, I can't communicate with the modem by http, telnet, or anything. I have to connect thru the serial port. Is there any way to enable the http/telnet over my LAN through the...

GVC BB0040 - Question + Any tips on using it?

Sun, 06 Dec 2009 07:16:48 GMT

Hi, I got a problem with the GVC BB0040; every once and a while, it seem to lost the connection... I have to restart the modem so that my computer see the Internet (the modem is configured do the PPPoE connection and my computer ...

Nikon LS40 Inconsistency of Frame offset

Sun, 06 Dec 2009 07:16:48 GMT

I think batch scan of vuescan is nice feature. But I have trouble of Frame offset. So I cannnot leave PC while scanning. It is inconsistent, and sometimes scan starts before the edge of film, the minimum frame offset -37.941 is not enough,...

RCA CDS1005 digital still camera

Sun, 06 Dec 2009 07:16:48 GMT

My brother and I recently got the RCA CDS1005 digital still camera. However, we can't find any drivers for it anywhere, generic USB drivers and filesystem mounting doesn't seem to work, and RCA tech support was worse than useless. Can any of...

Video mode/driver

Sun, 06 Dec 2009 07:16:48 GMT

Hello, Just ?upgraded my desktop with an Elitegroup 741GX-M mother board. The documentation says it has a SiS Real256E 2D/3D Graphics on board , any one know which is the best driver for this with 2.4.21 kernel? At present I'm having...

BE6 & Quantum Fireball 9.1GB KA Boot Problem

Sun, 06 Dec 2009 07:16:48 GMT

Can someone please help me with this problem. I have a working system based around an ABIT BE6 / Pentium III @ 450 / 64MB PC100. ?Trouble is, I'm unable to get a "missing O/S" message from the Hard Drive. I've tried the Hard Drive on...

Linux and Olicom OC-3137 (Token-Ring)

Sun, 06 Dec 2009 07:16:48 GMT

Hi, who knows about a working driver for the OLICOM PCI Token-Ring-Card ? Thanks Please answer via eMail to: Manfred_Bec @msg.de ? ? ? ? ? ? ? ? ? ? ? ?-or- Ralf_Matth @msg.de

Promise Ultra100TX2 problem

Sun, 06 Dec 2009 07:16:48 GMT

Hi! I have an Intel D815EFVL motherboard (on-board graphics, sound and LAN). I installed an additional Ultra100TX2 ATA100 controller so I could install four disks (one per channel). I use kernel 2.2.19 with IDE, RAID and some other...

3COM 3CRWE737A-E1 AND WAP11 v2.2

Sun, 06 Dec 2009 07:16:48 GMT

I have a problem that a 3com 3crwe737A-E1 PCMCIA card under windows 95 not will communicatie with my linksys WAP11 v2.2. It even will not see this AP. When I setup my linksys WMP11 under linux to act as an AP then this car will...

Installing SLES9/OES on Tyan S2865

Sun, 06 Dec 2009 07:16:48 GMT

Hi group, so i hope anyone can help me to install SLES9 or OES on the Tyan K8E Board. My problem ist that no harddisks where found to install the system. The board has an Nvidia Nforce4 chipset and i will use the onboard sata controller...

GA 7IXEH Problem

Sun, 06 Dec 2009 07:16:48 GMT

Hi all, after installing the GA-/IXEH i have some trouble: When i connect either a CD-ROM or a DVD-ROM to the second channel, system will not boot (no info, no timeout messages).Trieing jumpering as Master or Slave makes no...

Bluetooth mouse Targus AMB01US scroll wheel not working

Sun, 06 Dec 2009 07:16:48 GMT

Hi, I just got a new bluetooth mouse Targus AMB01US and it works out of the box except for the scroll wheel. I verified that the wheel works on WinXP. Does Anyone know how to enable the scroll wheel on 9.1? Thanks in advance! ...

2.5.25 uhci-hcd very bad

Sun, 06 Dec 2009 07:16:48 GMT

usb inboard Abit BE6, ADSL modem Speedtouch usb. I used to use satisfactorily usb-uhci-hcd before 2.5.25, switching to uhci-hcd halts the adsl modem after a few minutes with this message: kernel: uhci-hcd.c: c000: host controller process...

new hard drive = stuffed network, winXP

Sun, 06 Dec 2009 07:16:48 GMT

today i replaced my second hard drive (was IDE) with a SATA drive. only problem is now the network has stopped working - winXP says the LAN/network bridge is enabled, no probs mentioned in device mamnager, but it never recieves any bytes,...

GVC BB0040 modem questions?

Sun, 06 Dec 2009 07:16:48 GMT

I just picked up this modem from my ISP and I think it (or the cables) might be defective. During the modem power-up test, should all the led status lights light up (for a second) except the 'PC' status light? ?All my lights flash on for...

sound card driver - Gigabyte GA-8I915PL-G (Rev 1.x) Motherboard

Sun, 06 Dec 2009 07:16:48 GMT

As far as I can tell the driver is a: Realtek ALC850 audio codec I have been playing with alsa and just cant get this working. ?Gigabyte do not provide a linux driver. Any help appreciated. Cheers,

Linux Fedora Core2 and VIA EPIA CL10000 network problem

Sun, 06 Dec 2009 07:16:48 GMT

Hi, I bought VIA EPIA CL10000 motherboard with two network interfaces, installed Fedora Core2 os and everything is OK except NETWORK! Has anybody any idea what may be wrong? It seems os recognizes adapters but there is no...

Problem with GA-7ZMM

Sun, 06 Dec 2009 07:16:48 GMT

Im not sure if its to do with the Duron 700 or the GA-7ZMM. But, when I install redhat linux, and I boot it up, it comes up with and error of an idle task and just halts, I put the hard drive into my other machines and it works, can someone...

Proxim/Orinoco/Agere AP-500

Sun, 06 Dec 2009 07:16:48 GMT

Hallo! Ich hatte mir ??ber eBay als Schn??ppchen einen Accesspoint aus der AP-500-Baureihe von Lucent/Orinoco/Avaya/... (und wie sie alle heissen) ersteigert. Nun habe ich aber folgendes Problem: Ich kann das Teil nicht managen. Mit...

Proxim Orinoco Gold & NetStumbler 3.30 Problem

Sun, 06 Dec 2009 07:16:48 GMT

I'm trying to get Netstumbler 3.30 working with a Proxim Orinoco 11b card (model 8240). I'm running Win2kPro. The card works independently and connects to networks - the problem is stumbler cannot see it - the card is greyed out in the...

TDK DVDR Problem

Sun, 06 Dec 2009 07:16:48 GMT

Hi all Hope this is the right place to ask!!!! I have recently burned by internet backups, and various documents to DVD-R - as I normally do on a regular basis. I recently needed to retrieve a file off the DVDR - however, Windows 2K...