Questions & Answers for: Mitsubishi WD lines appear

LINES APPEAR AND THEN SHUTS OFF THE LONGER I LEAVE IT OFF I GAIN A FEW MORE MINUTES,,,,,,,,,,,,THANX FOR ANY HELP I CAN GET ON THIS. 1. CHECK C2P08 100 UFD 16 V OFF PIN 3 OF IC2P03 (3.2 VOLT REGULATOR

Solid Line Across Screen I have a solid line that appears across about one-half the screen (near the bottom). It ends in a small circle, perhaps the size of a pin-head. When the set is just turned off

...lines appear using a dvd and removing the cable from the cable box. if the lines disappear then call the cable company and your electricain. in the mean time you can use a plug adaptor that is the 2 ...

...with pip one will show the lines and the other will not. any ideas? lines appear to be red and blue. just in case you came across this - it is the light engine! $950 - thanks mits for complete ...

30 ish white lines on screen Hi,i have a sagem 56" dlp tv,recently about 30 white lines about 1" apart have appeared on the screen.These lines are not permanent some times lasting for 2hrs other times

lines appear now and then; not clear picture sometimes when I turn the tv on, I'll see green horizontal lines, and then vertical lines too. the picture image not good for having this hd tv. then other

lines do not appear and also the lines do not appear on a source thats not hooked up (turn to that source and get blue screen but no lines). What could be causing this issue? Bad capacitors. On my set

lines appear and stay all the way across the screen. They are about 1.5" inbetween each vertical line, You have a failure in the vertical circuit. Service can run between $75 to $150 depending on your

lines appear to be blue, with small "specks" of red or and white. The lines appear to move across part of the screen, from left to right. But they do not move across the entire screen. It as

mitsubishi 52" gray vertical lines appeared then mitsubishi 52" gray vertical lines appeared then no picture no 200v for video line open low value resistor for the 200v