poor breaks have put new breaks and rotors and master sillener still cant get full break When you open the breaking system you allow air to enter the break lines and that will cause squishy or weak ...
...and has a 3.3L V6 engine. The 3.5L engine is a LOT different then the 3.3L engine. make sure the lines are not crossed and also check the condition of the drivebelt ...
will not start. I changed the alternator and it turns over fine, but no start. There is fuel in the lines, but I smell no gas when flooring the pedal. I plan to change the fuel filter, but how would I
trans has a hard time shifting into final gear. It seams to serge 3X before shifting. Also fluid must be hot going through radiator because car started to run hotter since the problem started. I ...
...change my fuel filter on my 93 Chrysler dynasty any help!? Do I need a speciel fuel line disconncet? There dosent really seam to be much space for one thanks that fuel filter should have the "tool" ...
...intake and see if it does start, if it does, then I would check the fuel system starting with the lines back to the
...line is leaking right above my alternator and next to my power steering fluid on 1991 Chrystler New Yorker Fifth Avenue 3.3 liter is there anyway to change the part where it leaks at connection or do ...
...of all the vehicles and is part of the fuel guage assembly. Second is a sealed paper element, in-line unit; mechanical system- located on the engine (above the fuel pump) or electrical system- ...
...after replacing cv axle something in brake caliber? If you removed the brake caliper from the fluid line you will need to bleed the air out of the brake fluid lines. It can be possible that brake ...
Question about 1991 New Yorker
...needle. I believe yours just pops in and out. But some are soldered. You can get both kinds on
Usually answered in minutes!
156 Questions
147 Questions
162 Questions
127 Questions
111 Questions