Questions & Answers for: line 6 spider 3

...Line 6 Spider 3 75 Watt amp is having trouble. After I have been playing the amp for a while (30mins - 1hr), all lights go off apart from the display panel at the top right, which goes blank, and the ...

...line 6 spider iii En los amplificadores Line 6 Spider III ¿puedo conectar pedales de efectos que no sean de la misma marca línea 6? translation: In the amplifier Line 6 Spider 3, is it ...

...line 6 spider lii 30, output i,c blown apart number is unreadable, any ideas re: number It is LIKELY a TDA2050 which is available from DigiKey.com for about $3. This is a common part used in the Line ...

need owners manual for line 6 spider 3 stereo guitar amplifier Try this site: http://www.scribd.com/doc/5573363/Line6-Spider3-Guitar-Amp-Manual

...line 6 spider 3 amp it keeps blowing the fuse MOST likely the power amp chip is blown. They use a TDA2050 chip that is in a seven lead power tab package similar to the TO220 transistor package. ...

...line 6 spider 3 75W amp will not show any lights when I turn it on nor make a sound. Only the backlight on the display will turn on and be blank. I have tried the factory reset and it still will not ...

will this pedal work on my line 6 spider 3 75 watt amp? It supposedly will work with your amp. It scrolls through the first four presets.

...Line 6 spider 3 of 150 w, and i buy a floordboard, when i connect it, the pedalboard damage my amp, burn the processor Board, and i dont know where to buy this part. It is NOT likely that any ...

...Line 6 Spider 3 15w amp randomly go to flange? No matter the setting I have it in, the flange kicks in and I have no control over it. Provided that you're not using any external devices, and plugging ...

how to reset line 6 spider 3 15 watts Turn the amp off. Hold down the A (or clean) button as you turn on the power and hold the button for 5-8 seconds, then release.