Questions & Answers for: lime buildup

Question about PS-200 Iron with Auto Shut-off

1 Answer

...lime buildup, so be sure to keep the surrounding area protected or do it in a sink. Keep in mind it will discolor metal so be careful if putting it in a stainless steel sink. Always rinse and flush ...

Ad

Question about MDB9600A Jetclean II Built-in Dishwasher

1 Answer

Lime buildup on Maytag MDB5100AWW I have a 5 year old dishwasher that is gunked up with lime from hard water. I am wondering if there is a way to remove the bottom sprayer to clean inside of it. I ...

Ad

Question about Profile PSW26P Stainless Steel Side by Side Refrigerator

1 Answer

...be appreciated! Use a product like lime-away may help. These water spots are caused from calcium buildup. Lime-away or similar product will dissolve the calcium. Then use the stainless cleaner on

Question about Profile PSW26P Stainless Steel Side by Side Refrigerator

1 Answer

...Lime Scale Buildup. Also, how do I read the rest of the teasers at the bottom of this page. try vinegar hoiwever you should not have to do this. have you been putting salt in? this is essential in ...

Question about Profile PSW26P Stainless Steel Side by Side Refrigerator

1 Answer

Heavy calcium buildup on the heating element Get some c.l.r. (calcium,lime,rust) remover at a supermarket.Add a cup and run a cycle,this should solve your problem--repeat if necessary.

Question about 24 in. GLD2350RC Energy Star® Built-in Dishwasher

1 Answer

Lime buildup I have lime buildup on the heating element of my dishwasher Limescale is mostly calcium or magnesium carbonate and will dissolve in acid. If you don't want to use the commercial limescale

...What do I do?? Try cleaning the lime out of the steam system. Lime buildup may be interfering with thermostat. Most likely is thermostat is wrong/broke and you should consider just buying a new ...

Question about Stiromeglio Compact PRO 300 Iron

1 Answer

...probably acts on a needle valve that controls the flow of water to the point at which it is turned to steam and it may simply be too contaminated with lime buildup to slip back into the valve

...buildup of calcium or lime, and told us to us vinegar to help break it down. This hasn't really solved the problem! Could circulating pump, capacitor, or control board be bad? could be that the ...

lime buildup). Other than disassembling the pump and clearing the calcium mechanically the only thing that I can think of is pouring CLR (Calcium, Lime, and Rust remover) into the port where the water

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Irons Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39388 Answers

Are you an Irons Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...