...light tunnel how do I replace the light tunnel on Infocus X3 Are you speaking of the small prism shaped tunnel or the lamp itself? The prism or light tunnel may be accessed underneath the metal ...
Question about ScreenPlay 4805 Multimedia Projector
light tunnel repair cost? I had the same light tunnel symtoms as a previous post. It resulted in what appears to be a burned out bulb (short fuzzy crackly sound followed by darkness and a flashing red
light tunnel issue.Could you please send me the details you have . regards Gerry ps email address is [email protected] Hi Gerry You will have to be more specific many people think they have
...light tunnel" this tunnel takes the light from the bulb and compresses it into a smaller beam of light that is then shined onto the DMD(million mirrors) this produces the picture on a DLP TV. this ...
Question about ScreenPlay 4805 Multimedia Projector
...Light Tunnel on a SP 4805 I was experiencing the common "Yellow bar" symptom on the right of my screen (unit ceiling mounted), and by everything I read here, I assumed it was a light tunnel issue. I ...
Question about ScreenPlay 4805 Multimedia Projector
...light tunnel for my infocus X2 i need to know where i can get a new light tunnel from, my infocus projector has had little use now it's doing my nut in & by the way they knew about this problem from ...
Question about HDLP50W151 50" Rear Projection HDTV
...tunnel. Light passes through the mirror tunnel to the DLP. The tunnel is made up of 4 mirrors glued together. Over time the glue comes apart and the tunnel shifts. It starts out like this: |_| and ...
light tunnel under the colorwheel has collasped or the projector has been jarred, knocking the mirror inside of the lens assy. out of alignment. Either way, it will have to be repaired by a technician
Question about ScreenPlay 4805 Multimedia Projector
...Light Tunnel failure. Go to www.avsforums.com and search for 4805 Light Tunnel. There are instructions to open the PJ and repair the Tunnel. Also, I posted a DIY replacement option in lieu of fixing ...
RCA Light Tunnel Casting holding light tunnel is warped. I need to know the correct position so I can shim it. The tunnel was collapsed also but I have fixed that. I have one for sale 75.00 2705898074
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions