Questions & Answers for: liebherr fridge sound

...Liebherr fridge keeps filling too much with ice. The ice grows around the door and seal which makes it impossible to close properly. I inherited the f/freezer so I don't have the instructions for how ...

I have a new lieherr refrig with freezer on the bottom. was told have separate motors. no drainage bin. water collecting under plastic bins and onto floor - while we were home. (not collecting when we

I have a full length fridge and the door seems to have dropped about 1/4", causing the door to bind at the hinge and catch against the adjoining unit on the closing side. What do I adjust and how

ref LIEBHER STAUNLESS STEEL LARDER FRIDGE KES 3660 tHE APPLIANCE IS APPROX 3 YEARS OLD BUT HAS STARTED TO FREESE ALL THE LOWER CONTENTS AND THE TEMP GUAGE SEEMS TO HAVE STOPPED FUNCTIONING Sorry to ...

I have an apartment size refrigerator with fridge on top and freezer at the bottom. The freezer has stopped freezing. Upon cleaning out all of the damaged food from the drawers, we noticed that there ...

I have water dripping down the back panel inside the fridge-it is constant. I wipe down the inside back wall, but hours later the water is back. The fridge appears to have a "channel" for this water I

...Liebherr 326L bio fresh fridge-freezer. Worked always perfectly, however in the last two days the temperature in the fridge is constantly increasing. We always have 5C and now it started to play up ...

Freezer temp shot up & then fridge temp shot. Not cooling either compartments now. Sounds like a loss of freon and this is better handled by a service company or it could be a relay issue.

My integrated Liebherr brand new fridge/freezer is making a clicking sound? Fan? It’s not the alarm then you have the dealer send out the tech to fix it we do not try to fix NEW things warranty work

...Liebherr fridge/freezer The LCD display on my 4 y.o. Liebherr fridge-freezer model CPEL4813 is faulty, so that figures cannot be read clearly. Also fridge section cannot be turned off using on/off ...