Questions & Answers for: lg washing machine knocking spin

LG Direct Drive washing machine WM-16220FD which is now about 18 months old. Recently, during the spin cycle a loud vibration has started from the front left side as you look at it. This noise happens

...washing machine is making a knocking sounds as if there were base balls inside during spin cycle. Ours started knocking several months ago and then progressed to a high pitched sound when in the spin ...

LG front loader the machine I bought today knocks really bad on spin cycle? They told me under neath the machine you had to do something to it to fit it? Do you know what it is? There may be a block ...

...spin cycle is on the drums knocks arroung inside, what could the cause be. Need help please. This is caused by an unbalanced load. Stop the washer and redistribute the clothing evenly. The knocking ...

...LG front loading direct drive washing machine (WM1812CW) that is 5 years old that is making a loud knocking noise during the spin cycle and is emitting a burnt smell after the cycle ends. Clothes ...

washing machine LG wd-1238c knocking when spinning During the spinning cycle of a larger load (7.5kg model) as the spin increases a knocking noise progressively gets louder. I have used 1200 and 1000 ...

lg intellowasher 7kg wd8015c When ir is On the spin cycle it has a knocking sound and will stop. I have toyed the spinning with very small loads and it still happens OVER LOADING YOUR FRONTLOAD WILL ...

...just louder clicking/knocking just during spin cycle. Machine is leveled on cement floor. bad counter weights? Hi,can be worn dampers,worn feet rubber alowing machine togitter slightly.just a

...washing machine has developed quite a severe knocking sound during the spin cycle - machine is not full, isn't an uneven load. Machine is level on level floor. some washers have a concrete counter ...

...lg turbodrum it Is flashing UE at end of spin cycle and making loud knocking noise when spinning What could the problem be please thankyou UE = unbalanced error. Could be broken spring. If it’s a top ...