washer/dryer LG WD-1485RD. It was always 'thumping' when washing...now stoped altogether. When I took the back off, found 'shock absorber' detached on one side. Now fixed but machine wont go. Is there
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
washer displays problen 0E Bent pinched or clooged drain hose. Other cause may be the drain filter in the front of the machine. (The small door on the lower left of the machine) With a pan, remove the
...LG WM0532HW front load washing machine that stopped before finishing a load of laundry yesterday. It displayed the LE on the panel. It will fill and drain water but will not spin. It tries but just ...
lg intello washer error code cl hi my lg intello washer 7kg will not come on it displays error code CL in panel and wont operate please can you tell me what this means thnx fault code "cl".you have ...
LG washer intermittently in the past. We have already been down the road to replacing the Hall Sensor only to find the washer not spinning and displaying the LE error again. Here is what we have found
LG WD-80490TP wont start lc displays"CL mode" what must i do? It is your timer knob on your washer. You have to replace your timer, which be better than getting a new washer.
...lg front load washer model # wm2701hv i put in a load of laundry and it started beeping so i went in and it had an "oe" on the display i tried to run it again but when it gets to the last 30 min. of ...
Question about WM0642HW 4.0 cu. ft. Front Load Washer
...washer. Water is not getting to the machine. Soap is still in dispenser. I check lines for clogs and none have been found. Water is on. machines have a hot water and a cold water intake if the water ...
LG Steam Washer wont start We need more information. What happens when you try? It could be the door switch is not working because it came loose or it could be something else. What is on the display? ...
Question about WM0642HW 4.0 cu. ft. Front Load Washer
... lg-washing-machine-error-cod... Close both water taps. To drain out any trapped water, power the washer back on, press the spin button until no spin is selected, and press the start/pause ... E3 ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions