Questions & Answers for: lg washer 5 minutes

Question about WM-2077C Front Load Washer

1 Answer

...out what is in the washer now? Your motor sensor has failed. Try unplugging the unit and wait 5 minutes before plugging it back on. If that fails, you will need a qualified LG technician to help

Ad

Question about WM1814CW Front Load Washer

1 Answer

...board is stuck in the 8 minute drain cycle. Recommend pulling the plug and wait 5 minutes to reset the computer. If the problem persists, it will require an LG experienced tech to see what's going

Ad

Question about WM-2277HW Front Load Washer

1 Answer

OE ERROR CODE APPEARS ON DISPLAY ON MY LG FRONT LOAD WASHER OE - drain error - 5 minute time out drain time error. check your pump/filter for blockages

Question about WM2455 Front Load Washer

2 Answers

LG washer WM2455H The start button does not work, LG washer WM2455H The start button does not work, no matter how I press the button to start it is just flashing. Unplug the washer for 5 minutes to ...

Question about WM3431 Front Load Washer / Dryer

1 Answer

......

Question about Wm3470hva Wm3470hva Front Load Washer

1 Answer

washer from the wall wait about 5 minutes, plug it back in to the wall and press the power button. You should see all of the lights on the front come on and start cycling. wait about 2 minutes and you

Question about WM2688H Front Load Washer

1 Answer

.... If the door locked failed with the door closed or the washer is under warranty, contact LG or a repair professional for service. I hope this helps. Cindy ...

...LG front loader washer making noise in spin cycle, especially last 5 minutes Guessing bearings, gets stuck in those last 5 minutes, keeps rising + spinning with noise. open door and see if the drum ...

Question about WM2688H Front Load Washer

1 Answer

...model WT1201CY LG washer serial number 412PNYU5B994 model WT1201CY Where is reset button on this washing machine ? It most likely doesn’t have one. Unplug for 5 minutes. That may reset ...

Question about WM2688H Front Load Washer

1 Answer

...LG washer stuck on load sensing To reset this issue, the manufacturer advises to unplug the machine, press the Start-Pause button, and hold it in for 5 seconds before restoring power by plugging it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...