...lg intellowasher to a setting and pushing the start button, the washing machine does nothing for about 30 seconds then all the lights start flashing. Normally, once the start button is pushed, the ...
work The machine goes through its load sensing and then switches to wash. Water doesn't flow into the machine (only cold water cycles). The machines slowly spins waiting for the water to fill,
...LG frontload washer model #wm2496hsm. The detergent dispenser was not working so I thought I would try cleaning the hoses. I marked on the soap compartmentside but not the valve side. And I think I ...
Question about WM-2277HW Front Load Washer
...lg machine went PE The PE error or fault code indicates that the machine is overfilling with water. This washer is equipped with a water level pressure switch. As the machine fills, the pressure ...
...lg washing machine The PE error or fault code indicates that the machine is overfilling with water. This washer is equipped with a water level pressure switch. As the machine fills, the pressure ...
Question about LSC26905TT Side by Side Refrigerator
LG 'smart' refrigerators, the error code CF means that the refrig control board 'thinks' the condenser fan down by the condenser coil is not working. I don't know ow the board senses that, unless it's
...lg fuzzy logic shows PE it says PE and makes a peep peep noise The PE or pressure sensor error or fault code indicates that the machine is overfilling with water. This washer is equipped with a water ...
Question about 4.0 cu. ft. Front Load Washer, White - WM0642HW
...lg wm0642hw washing machine Error pe??? The PE error or fault code indicates that the machine is overfilling with water. This washer is equipped with a water level pressure switch. As the machine ...
Question about 4.0 cu. ft. Front Load Washer, White - WM0642HW
LG 5kg fuzzy logic model WFT5005T Top Load and it keeps screening PE and I don't know what it means. PE stands for Pressure Error. This washer is equipped with a water level pressure switch. As the ...
Question about 4.0 cu. ft. Front Load Washer, White - WM0642HW
...lg dryer wasn't heating and I cleaned out very clogged vent. Now that works but the flow sense light is still staying on? Take vent off back of your dryer and dry a load. See if flow sense goes off. ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions