Questions & Answers for: lg dryer takes time dry

lg electic dryer Dryer heats and seems to be blowing ok outside of house, but still takes to long to dry. It doesn't get dry on sensor mode. Larry Your vent to the outside is restricted and needs to ...

LG Stacking Dryer Ok, we purchased the LG stackable washer and dryer. The Dryer uses gas instead of electric. The problem is I need to dry loads of clothes using multiple cyles for them to dry. My ...

Dryer LG 6DTD3120 I have an LG dryer that was converted to PROPANE last October. It intermittently had problems drying clothes, now it takes FOREVER to dry any load, no matter the setting. I have ...

...dryer is drying the "drying" light flashes and the "cooling" light is on steady until the 5 minute cooldown at which time the "drying" light stays on steady and the "cooling" light flashes. click on ...

...LG Tromm DLE2514 electric dryer. It has never dried as good as any of my previous dryers. It takes 2 hours or more to dry a normal load of towels, and clothing can take 90 minutes vs. old dryer of 50 ...

...lg dryer model DLG5966W and the check filter light is on. It takes two cycles to completly dry my clothes. I cleaned the lint filter and still doesnt dry on one cycle. I then removed the filter and ...

...lg dryer is taking way to long to dry ,we have to run it three times at 100 min its getting hot but,but that it takes way to long to dry cloths Hi, If your dryer is not drying like it once did or if ...

Lg gas dryer has heat and is venting properly but clothes take 2-3 cycles to dry compared to before single cycles. Hi, If your dryer is not drying like it once did or if you just have not taken the ...

...LG TROMM dryer model DLE7177RM and the it takes a long time to dry. under the processing display is reads DRY and Cooling at the same time. Any ideas how to reset the dryer? That is normal in the ...

...LG front loader dryer Electric. It takes a long time to to dry a load of clothes.I cleaned out all places that lent would be.Still long time to dry. I don't have a manual HELP!!! Takes a long time to ...