Questions & Answers for: lexmark x3470 cover close

Question about X3470 All-In-One InkJet Printer

4 Answers

...lexmark x3470. The screen displays "cover open". I have opened and closed the cover a few times to try to fix this problem. I have unpluged the power pack and waited for about 15 seconds. It still ...

Ad

Question about X3470 All-In-One InkJet Printer

1 Answer

Lexmark X3470 Printer Plastic clip (white)fell off I cannot snap this plastic clip back in place. I've tried placing a wad of tape over the black little finger trip. Also under the tini black trigger ...

Ad

Question about X3470 All-In-One InkJet Printer

2 Answers

lEXMARK 3470 COVER OPEN Cartridge changed the message says cover open when it is closed there is a switch actuator on these cover try to see if you can find any piece of tab that actuate these ...

Question about X3470 All-In-One InkJet Printer

1 Answer

...Lexmark X3470 printer says cover is open after I replaced ink cartrage put your finger on the second hole on the top from the right and press the switch (it's small, gotta try a little...), when the ...

Question about X3470 All-In-One InkJet Printer

1 Answer

...lexmark x3470 all in one Hi.. To scan a document using the Lexmark Imaging Studio on ur Lexmark X3470, follow the steps given below: 1. Go to "Start," "All Programs," Lexmark X3400 series, "Lexmark ...

Question about X3470 All-In-One InkJet Printer

2 Answers

lexmark x3470 cover open on display even after open/close several time what to do? Try looking around the edges of the cover or in the hinge area for a switch that may be stuck. Most covers have a ...

Question about X3470 All-In-One InkJet Printer

1 Answer

...Lexmark X3470 open cover message always and any botton doesn't respond : You have go to service, becouse the switch for cover is brouken, and they need put them ih close mode. In same primter model ...

Question about X3470 All-In-One InkJet Printer

1 Answer

Lexmark x3470 printer says "cover open" and it will not do anything. Curtis Try these as I found them from Lexmark's website Solution What you will see The printer displays a 'Cover open, please close

Question about X3470 All-In-One InkJet Printer

1 Answer

Incorrect "Cover open" indication Says,"Cover open" when it is closed. Hi, the cover sensor may have gotten stuck. So, even though the cover is closed, it's still sensing that it's open. Here's a link

Question about X3470 All-In-One InkJet Printer

1 Answer

...and make sure they are properly seated and secured. Close the cover. Load some paper. Try to print again. If problem continues, please contact Lexmark technical support for additional

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...