Lexmark W480 jam in D The jam is cleared, completely, but the message will not go away. Could it be a jam sensor issue? If so, how do you fix it? Try reset . Unplug the unit from power chord for 30 ...
Lexmark W840 phantom paper jam Printer claims that there is a jam in Area A, but there is none. Paper comes out of the tray and starts the climb up to the PC unit but it stops after about 1.5 inches. ...
Lexmark w840. The printer alarm goes off for every job because the printer thinks that it has 11x17 paper in both drawer 1 and drawer 2. Drawer 1 has 8.5x11 and 2 has 11x17. I have adjusted the guides
service fuser 920.00 This means your fuser temperature is not correct. You have to replace the fuser.
...lexmark w840 thanks Go to this link for the instructions ...
...pc cartridge sensor. If problem continues after replacing pc unit, I strongly suggest you contact Lexmark technical support or an authorized service provider for assitance. Thank you for choosing ...
...Lexmark W840 Laser Printer Here is an excerpt I found from the W840 user manual. Looks like you need to change the photoconductor kit. Here is the link for the user manual: ...
My W840 message : 9.12.00 Service Motor Error The PC (photo conductor) cartridge motor does not rotate at the specified speed. Check the PC cartridge for installation. Is the PC cartridge installed ...
lexmark w840 has no text on display and gives 3 beeps gets no text on display and gives 3 beeps green light goes to red. please reset momery of printer
how do i reset a 202.02 error you can check following link ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions