Questions & Answers for: lexmark printer t642 fuser service

fuser is to high or to low. In order to fix this error you can try powering down the printer for 10 to 15min and retry . I think though you will have to call for service or replace the fuser yourself!

...fuser is below standby temperature when the printer is idle. Error codes 920, 921, and 922 may display for a cold fuser failure. A 920 error caused by low line voltage can sometimes be cleared by ...

Lexmark E342n Laser Printer Fuser Error Hi I got a lexmark E342n Laser printer im tray to print but they got a error messages message is: Fuser Error Error code is 920 can you help me to fix my ...

Lexmark T642 Laser Printer error message922 02 My brand new printer is giving me an error code 922, Service fuser error. Any thoughts on why this would occur? Service fuser error requires a ...

920.07 code on a t642 a 920 error means your fuser is under temperature at standby. you should replace the thermistor it cycles the fuser on and off to maintain these temps

lexmark with a fault code 920.000. my guess is that the fuserisnt heating up... based on the fact that its not getting hot... im guessing the fuser lamp has blown.... is there any other reason you can

...fuser unit in the printer is below the proper temperature for printing. Turn off the printer for 30 seconds. Bypass any surge device or power strips, plug the printer straight to the power outlet in ...

Lexmark printer to work doing this, but this is in the manual. If this won't help, and the printer is under warranty, you should log it in with the servicing company. If the printer is out of warranty

lexmark t644 is showing "920.06 lexmark t644 is showing "920.06 service fuser error", how i will solve it? 920 error is cold lamp on fuser replace fuser will clear problem

...lexmark T642 printer displays 922.02 service fuser error when the printer was never used? It could be the connector to the fuser from the LVPS is not connected properly. It could also be the ...