Printer won't print The message states the paper thickness lever is the cause. What and where is the paper thickness lever, and how can I correct it? hi Printer won't print but the paper come out
Paper thickness lever postion When we go to print it comes up with that the printer is offline then down below it states Paper Thickness Lever Position. I am totally confused. Is there a lever inside ...
...when I try to copy check thickness lever The Paper Thickness Lever should be set to the left for normal/plain paper. This switch can be seen inside the unit in the area of the paper output
...Paper thickness lever position. I move paper thickness lever to far left for paper, not envelopes. Running 11 x 17 paper. Normal thickness paper not card stock or anything special. Cannot locate my ...
...paper thickness lever at the front of the printer but there is none on mine. I have a canon mx310. dvlknc The paper thickness lever is not on the front...it is on the floor of the "paper output tray" ...
Question about i850 InkJet Photo Printer
...the paper thickness lever (blue lever on top of the print cartridge holder)? It should be all the way to the left when you start--if it needs to be adjusted the printer message will let you
Question about PIXMA MP780 All-In-One InkJet Printer
...paper thickness lever- but I cannot find it Any ideas?? Some printers have a certain paper height or paper load you can have loaded at one time. I would try loading a smaller amount of paper and see ...
...paper thickness lever position" error. I tried adjusting it as described in the manual, but am still getting the error the thickness of your paper does not match the setting of the paper thickness of ...
Question about Stylus Color 600 with GT-5500 Scanner InkJet Printer
...paper thickness lever has two settings, one for plain paper, (thin paper 20# to 24#) and one for envelopes and thick paper. It should be on the 0 setting for thin paper and on the + setting for thick ...
Question about Stylus CX4800 All-In-One InkJet Printer
...paper the lever should be in the down or "L" position. If you are using envelopes the guide instructs that the lever should be in the up or "H" position. They give you a complete table with the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
