lens while it's out and it's not bent, nor does there seem to be any other physical fault with it. I've also tried removing the batteries and warming them up before replacing them in the camera - on a
...lens on my Sony Cybershot got bent after being dropped. Tried following advice above and it didn't work. I applied pressure (pushing in) on part sticking out, and applied pressure pushing out on the ...
lens studders and doesnt open or close fully , it also gives me a error E:91:01. ive read that it is a motar problem but i dont know how to take apart the camera saftly. can any one shed some light on
Question about Cyber-shot DSC-S600 Digital Camera
...lens was bent and stuck part way in camera. My brother was playing around and moved lens and it started to work again. If lens looks a little crooked try moving it or putting it straight. Hope it ...
Question about Cyber-shot DSC-W80 Digital Camera
...lens is unable to open fully. so error message comes like "please start it again". Please let me know how can i fix the problem..the problem may be with broken gear i guess Usually the case gets bent ...
Question about Cyber-shot DSC-W120 Digital Camera
...bent the lense i think one side is slitely up more than the other. Now the lense won't pop out at all. It just keeps saying "please turn on and off again" but it still won't extend the lense. PLEASE ...
...bent and hence not making correct contact with the battery .... sometimes there cud be dust or sand particles in the lens retraction passage... blow out air in those places..... this cud help a great ...
Question about Cyber-shot DSC-W130 Digital Camera
...bent and hence not making correct contact with the battery .... sometimes there cud be dust or sand particles in the lens retraction passage... blow out air in those places..... this cud help a great ...
...bent to one side and will not close. Its not scratched but its not aligned properly. Is it new camera time? Hi, Sorry to say that although your camera is in warranty but it does not cover under ...
...lens is bent you can gently snap it back in place. More than likely you will need to replace your camera lens. I think i may have an extra lens.. just let me know, i could walk you thru the ...
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions