Questions & Answers for: leak pressure washer wand

Have hole in water hose to wand. can it be fixed Have hole in water hose to wand. can it be fixed or can I get a replacment? Den. you cannot fix the leak, you must replace the hose.

...pressure from the wand when trigger is squeezed. washer was working and then the leak started and it didn't work after that. electric washer, 1700 psi or thereabouts. sounds like the bladder or seals ...

...pressure washer is leaking through the trigger handle. I have no pressure coming out of the wand but the motor runs. The fitting for the trigger is cracked. It happened to mine because I did not make ...

Powerstroke pressure washer PS171433 diagram for the gun wand Can find where the O ring goes. Gun wand leaks. in European coupling

...wand leaking handle There are no parts available for the inside of the guns. All you can do is replace the gun. see parts in ...

...pressure setting. Switch wand or set wand to lower setting. Pin hole leak in soap line can also cause problem. I was having a similar problem with my pressure washer a couple of months ago. I thought ...

pressure wand is leaking at the out let end, and pump has a small surge when setting at a idle i removed filter and cleaned it still same problem. Tried another hose but same problem. The unit works ...

...Pressure washer Model 580.752070 How to restore seal between Wand and nozzle? Please point me in the right direction to resolve this problem Turbo Wand and spray Nozzle when connected is leaking and ...

...pressure washer wand Is it just the O-ring or what else could be allowing water to leak from the hose connecting to the wand? Yes possible orange damage, could be the threads are comprised too.. also ...

pressure washer model K3.48M. My washer does not leak anywhere. The washer came with 2 wands. One of the wands works fine, The other does not; it acts like there is hardly any pressure. I took the bad