Questions & Answers for: lcx 28c

...lcx 28c hd fish finding sonar and mapping gps i loaded the lake chip for western part of the us, i live in colorado, i can not get any of the lakes to come. please advise. thanks bob I've had several ...

...LCX 28c HD with Navionics HotMaps Premium SD chip. Chip worked fine last fall but when I went to use yesterday the Lowrance would not read the chip. I have a Lowrance LCX 28HD unit with Navionics ...

Unit will not power up My unit will not power up. All the fuses and connections are ok I too have lowrance unit which is the reverse. it is powering up by itself as opposed to not powering up,despite ...

Trying to figure out how to start up my fuel guage on my Lowrance I have the HDS-7 It has a feature where it can monitor fuel consumption. Does anyone know how to set it up and do I have to buy a ...

...wait? If not, make sure you are not leaving the coverage area of the chart you are set to. In the LCX-20, that Navionics chart is split up into several sections, if you have one section selected

I have a Lowrance HDS-7 and it seems that when I power the unit down it powers itself up after a few minutes. Any insight? Make sure it is completely powering down and you are not just dimming the ...

...power right back off. The manual is here... http://www.lowrance.com/en-US/Products/Fishfinder-Chartplotter/LCX-28C-HD.aspx and you can contact Support here...

How much torque on the transducer mounting bolt? I install these and other Lowrance systems. For me there is no specific amount of tourque, it's primarily your best judgment. You want the bolt tight ...

It was staying on for about 6 hours then a blank screen. now it comes on to the startup screen and then goes to blank screen. Same thing happened to my older model. Going to research it today. Mine ...

Transducer Cable extension to Hook2 4x gps Primary cable has connection plug and power leads,extension cable has plug on one end and other end has plug and power leads. How do I get power to primary ...