Questions & Answers for: where is the latch knob

Ad

Question about Top Knobs Hardware & Accessories

2 Answers

...knob because the latch part won't retract into the door. Try taking the knob out of the door and spraying the whole latching mechanism with WD40 or some kind of lubricant. There is a few moving parts ...

Ad

Question about View 550 Treadmill

2 Answers

...latch knob to the left and hold it. Pivot the frame downward and release the latch knob. Note: To release the latch knob, it may be necessary to push the frame forward as you pull the latch knob to ...

Ad

Question about View 550 Treadmill

1 Answer

...the door handle/knobs first. Then the 'latch' will just pull right our of the hole. It may be a little snug if the bushing was used but it will come out. The door knob assembly holds it in

Question about Kaba Ilco Unican 1000 keyless lock

1 Answer

the latch). Test it by turning the knob again: The latch should not retract. Now enter your new code and it should retract the latch as you turn the knob. If so, you have successfully changed the code

Question about Kaba Ilco Unican 1000 keyless lock

1 Answer

...knob (I do not know that manufacturer for this.) I do not have the latch for it. It only came with a gray plastic piece. I purchased a schlage spring latch replacement part for this, but I can't seem ...

Question about Kaba Ilco Unican 1000 keyless lock

1 Answer

...latch when the knob is depressed but will not lock the door hello joan. check to be sure that the door properly latches when it opens and closes with out locking it at all. sometimes the latch does ...

Question about Treadmill

1 Answer

unable to pull the latch knob unable to pull out the latch knob, is there a trick try pushing upon the deck to relieve the pressure on the latch. then pull the knob

Question about 740ll 3 Smt Lido Keyed Entry Lever Polished Brass

1 Answer

...tounge stuck closed) removed knobs manually retract ****** You will probably need to replace the latch assembly. There is a small rivet that holds part of the latch together, and it also acts as a ...

Question about 740ll 3 Smt Lido Keyed Entry Lever Polished Brass

1 Answer

a ge wall oven latch knob? Shine a flashlight on the underside of the knob. You will see a black metal tab. Insert a flat screwdriver or blade between the tab and the latch. Wiggle the knob and remove

Question about 740ll 3 Smt Lido Keyed Entry Lever Polished Brass

1 Answer

latch cylinder into each knob so it could be a case of the knob has been knocked shifting the alignment out? Could be spindle too long and hitting inner ends of knobs or if knob has a spring, that has

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5353 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Brad Brown

Level 3 Expert

18060 Answers

Are you a Hardware & Accessories Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...