Question about MFC-9420CN All-In-One Laser Printer
laser all in one Hi, The roller in the fuser unit in my printer Brother MFC 9420CN has got burnt marks and leaves marks on the paper. Is it possible to just change the roller in the fuser unit, and if
Question about Color LaserJet 3500 Printer
...Laser Jet 3800 leaving roller marks on paper My HP Color Laser Jet 3800 is leaving roller marks on regular text weight paper. I've tried cleaning sheets and cleaning every roller that I see inside. ...
Question about 3100cn Laser Printer
Marks and smugges on the prints made my dell 3100cn color printer Just near the end of the printing process. As the paper exits all the rollers of the paper feed there is some marks and smugging of ...
Question about Color LaserJet 3500 Printer
...laser printer. Every time I use heavy weight or even a glossy finish it leaves two marks on the paper. I'm sure its from the roller that pulls the paper in. And it doesn't matter what setting I have ...
printer and when it prints it leaves about 4 ink marks on each page in the exact same spots. seems that the Print roller needs a cleaning. get it cleaned as there might be some extra ink on the roller
printer leaves black marks down the right side of my documents on every page. I have changed the toner but that does not help. Can I clean the drum? It may need general cleaning OR have toner stuck to
...roller but can't get access. Any solutions? takeout cartridge from printer & check if the same toner marks exist on drum then reffil your cartridge properly or change the drum if there is any ...
How do I clean the rollers on the printer? They are leaving ugly black marks on my documents. Turn the printer off. Disconnect the AC power-cord. Take a bottle of denatured alcohol, and some "Q-Tip" ...
...Laser Printer (LBP2900B)? If you have marks on your drum there would be repetitive marks every 76mm. Interval (mm; approx) Roller or component 55 Feed roller 46 Transer charging roller 38 Primary ...
...laser jet leaves two 1cm wide coloured smudge lines length ways on all my A4 prints. The printer is getting to about 2 years old now so i'm fearing that some major part needs replacing or indeed the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions