Question about Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television
...lamp indicator blinked a series of five times and then cycled through the six again -I thought it was an indication of a projection lamp but it turned out to be a board component failure. Now the ...
Question about UltraVision CineForm 55VG825 55" HDTV
...indicator light beside it green but blinks rapidly for half a second rapidly then shuts off. This refers to a faulty lamp or a lamp that is near its expiration. Read your manuals if indicators refer ...
Question about PT-50LC13 50" Rear Projection HDTV
...lamp" indicator blinks Red power button light blinks 1x/second and the red "lamp" indicator blink once every 5 seconds. Screen remains black, bulb is about 2790 hours old. Any suggestions? Having ...
...does it say anything about a slow blinking green lamp indicator, much less both the lamp and status indicators blinking at the same time (green and yellow). What can I do? Lamp is bad need new ...
...lamp indicator on the front also flashes red with long pauses in between. What can I do, because I don't have TV. Your service manual on page 82 steps you through decoding the blinking 1) there are ...
...lamp indicator is off, it's only the status indicator which is blinking red. I have not used the projector for more than 1000 hours. Somebody suggested that it might be a ballast problem. What can I ...
a little lever behind the main panel and if that's not shut, the lever won't be pressed in and therefore the light blinks. If it's a failed lamp, the lamp indicator light will be a solid, not blinking
...Indicator lamp: blingking (red) Please, what kind of this problem indicated? And how to fixed? Thanks Power - green - is good. Service - red - is not so good Lamp - blinking red - is not so good For ...
...Lamp 2 indicator lights blinked (Indicating Start UP). After some period of time, it switched to Red 6 times blink (Lamp Error). I've put back in the old bulbs...same thing. 1 red blink every 2.5 ...
...INDICATOR LAMP AND TURN SIGNAL SOUND OPERATION - BCM transmits the turn indicator signal to the combination meter with CAN communication while the turn signal lamp and the hazard warning lamp are ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions