Questions & Answers for: laminating machine

MACHINE. THIS CAN BE TIME CONSUMING USING REVERSE AND FORWARD TO REMOVE LAMINATE UNTIL ALL IS CLEANED. remove stuck film when the rollers are hot, this allows the glue to release from the rollers, you

...you a quicker lamination, and an operation which is Carrier free. These laminators can do all your laminating work for you, when necessary and where necessary, fast and economically.Read more at

What is the difference between cold and hot laminators? Hot laminators are the most common types of laminators. They use heat (220 to 300 degrees F) to apply the lamination. Hot laminators provide a ...

...laminating machine and plug out. Turning off the machine will prevent the motor from burning out. As the motor is not burnt, there is no need to repair or substitute the machine. * When the machine ...

laminator will not stop beeping We just brought home a new Royal Sovereign Laminator. Plugged it in and turned it on. It will not stop the loud, annoying beep and is stuck on reverse. It's going right

...replacing the machine. Where might I find it. The Circuit breaker is located on the underside of the machine near where the electrical cord goes into the laminator. West Laminating Svcs ...

...Norine, if indeed 10% did laminate, In all probability it will wreck the poster try to remove it. I am not sure if it will work, could you run the poster through the laminating machine a second

...laminating pouch into the machine. Last time I used it it worked fine. Maybe it just doesn't heat up to a needed temp Hello! That's a real problem. To be honest, I can stand when the devices are not ...

...machine, I got everything out except a small amount of film that is on the bottom rear roller. I can see it rolling around, but I can't get to it. Help! Is this a service call? you may try using ...