...L2 very similar to L3 and other same series, the cause of error is the flat cable that drives the step by step engine of lens , in my case it has broken a track that carries the signal from the home ...
...sony recorder using L1L2 how do you know the station you are recording. I think that L1 and L2 are the extension inputs (scart/phono) from an external source therfor you will only be able to record ...
...Sony ! It sounds as though the unit is actually recording a DVD, but is getting no incoming signal to record. What is your recording source? Satellite and receiver? Antenna? Cable box? In the set-up ...
Question about RDR-GX300 DVD Recorder
...SONY BRAVIA LCD Model # KDL-32L4000. The current linkups are as follows: From HD DVR: A. YPbPr video/audio component connections to TV ''Component In'' YPbPr connections (Y connections are actually ...
...the yellow (video) cables to both. Red (audio R) and White (audio L) to both. I set the VCR to L2 (input from front jacks). I hit Record then pause/slow on VCR. I go to the DVR and set it up to ...
...Sony input signal is on L1 or L3 (the inputs in back of recorder) or on L2 which is for inputs for cameras(located in front).Once you get a signal, you're where you need to be. Choose your recording ...
...L2 message on the recorder. If I'm understanding this as what I think it is - that's not an error message at all! It's the input your recorder is currently set on (I'm talking about ...
Sony dvd/video recorder turns on, says L2 then cuts off..what's the problem Hit the input select on either your remote or behind the flap on the front of the unit. It might be turned off cause ...
Question about DVR620 DVD Recorder/VCR
...L2; set at L1, Dubbing VCR to DVD. Recording compatible ON. HDMI Format to RGB. [TV & recorded DVD images] are the same; Height correct in HDMI selection 740x480, and [[vertically pinched in ...
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions