Questions & Answers for: kwikset loose

kwikset deadbolt The deadbolt on my front door is loose on the inside, the plate is falling off. There is a small hole on the bottom but I can't seem to tighten anything with a small screwdriver. Any ...

Loose Kwikset Chelsea Deadbolt My deadbolt is loose - I think it needs to be tightened inside the lock mechanism - tightening the face place does nothing. I cannot figure out how to get inside the ...

...Kwikset model 800 shelburne deadbolt which I am trying to disassemble.The inside deadbolt lock does not show the screws as they areconcealed. Also, close to where the bolt is attached to the door ...

...Kwikset door handle is very loose also. I don't understand how to tighten the screws either. The screws are located on the non locking side of the handle. To get the cover off most pop off by placing ...

internal components came loose in my front door. need a diagram to help put it back together. What type of lock in front door.

loose top lock how to tighten my top lock on the front door i can move my top lock with my hands from the iut side and when we turn the key it moves alot tighten the two screws on the inside of the ...

won't unlock, handle is loose Front door won't unlock, door handle is loose. Tighten all screws on lock to a firm tightness. DO NOT OVER TIGHTEN as to bend the lock casing! Snug only. Use powered ...

My lever is loose. How do I tighten it? My door lever is loose. How do I tighten it? take a flat head screwdriver and puch the spring loaded pin near the plate in and pull the lever off... use the ...

...Kwikset "lever opening" front door key/deadbolt lock system which has come very loose, almost falling off. How do I tighten it up\? on the inside of the door look on the bottom of the lock ...

kwikset thumb plate on handleset is loose and won't work Remove outer trim, tighten inner trim, put outer trim back. Go to Kwikset.com for full installation instructions for your model.