Question about Professional Door Lock installation Kit
...kwikset door knob to put on new door. remove the two screws on each side of the door knob from the inside of the door use medium size phillips head screw driver pull the door handle off remove the ...
Question about Professional Door Lock installation Kit
lock set My Kwikset door handle is very loose also. I don't understand how to tighten the screws either. The screws are located on the non locking side of the handle. To get the cover off most pop off
Question about Professional Door Lock installation Kit
...kwikset to take the cover off, remove the three screws and unplug the power ribbon. Leave it off for 5-10 minutes. Plug back in, put batteries in and system will work. I did that, it worked for about ...
Question about Professional Door Lock installation Kit
lock. I have a kwikset pushbotton lock about 2 years old. I need to change the batteries and I don't remember how. Any help out there? Elda Hi, If it's the lock I think it is, all you need to do is to
Question about 909 909-L03 Lifetime Polished Brass Smart Code SmartCode Signature
and covers mechanical function and finish for the lifetime of the lock. This link includes the info and contact information: http://www.kwikset.com/Customer-Support/Warranty-Information.aspx Good luck
Question about 909 909-L03 Lifetime Polished Brass Smart Code SmartCode Signature
...Kwikset deadbolt lock that has a key hole on both sides? There should be two screws on the inner face of the lock. they may be phillips or one-way. remove screws and the lock should come apart. ( ...
...Kwikset "lever opening" front door key/deadbolt lock system which has come very loose, almost falling off. How do I tighten it up\? on the inside of the door look on the bottom of the lock ...
Question about 991ll 15 Smt Cp Lido Entry Lever And Single Cylinder Deadbolt
...kwikset #991LL Remove inside lever by loosening the setscrew and pulling. Carefully pry off the inside cover. Make sure both screws are tight. Replace inside lever. With door unlocked, the outside ...
Question about Brooklane Venetian Bronze Entry Lever feat SmartKey 740BRL
...Kwikset lever handles are held on with hex set screws. A wrench is included in the package. It's either a 3/32" or 2.5 mm. Note that the lock must be unlocked to remove or install the outside
Question about Brooklane Venetian Bronze Entry Lever feat SmartKey 740BRL
...kwikset front door entry lock? I managed to remove the inside lever handle by removing the screw, but that's as far as I got. Call a Locksmith ! Locksmith Buffalo Ny 24 Hour Emergency Locksmith in ...
Usually answered in minutes!
208 Questions
160 Questions
140 Questions
126 Questions