...KP-46WT500 46 in. Rear Projection AND AFTER YOU TURN IT ON A SHORT PERIOD IT TURNS ALL RED IN PICTURE AND THE LITTLE RED LIGHT IS FLASHING 5 TIMES. WHAT CAN BE THE PROBLEM AND CAN IT BE REPAIRED? ...
KP-46wt500 My TV runs fine then starts to flash off (but not comletly off) then back. Basicly the screen goes blank then comes back. The amount it does this varies and it can go days without doing it.
Question about KP-46WT500 46" Rear Projection HDTV-Ready Television
...KP-46WT500 Arched red lines appearing, mostly noticeable when the screen is dark. I have heard there is a simple fix for this problem. I read something needs to be tweaked with screw driver, but i do ...
Question about KP-46WT500 46" Rear Projection HDTV-Ready Television
KP-46WT500- worth fixing? I have a Sony rear projection TV model KP-46WT500 that is 6 months beyond the extended warranty! and I believe a power surge blew out the TV- made a snap noise and picture is
...KP-46WT500 Hi, I have a Sony KP-46WT500 Projector TV. Recently its R G B clolour are separated. What is the root cause? you need to replace both convergence Ics number STK392-560 its a fairly easy ...
...46WT500 sony now has a blue screen, then turns off. the power went off last night while watching TV, power came back on, TV came back on then faded to blue and turned off. Any thoughts? ThanksPaul ...
Question about KP-46WT500 46" Rear Projection HDTV-Ready Television
kp-46wt500 with no red projector The tv works fine except no red tint in picture.I pulled the back off and found wth the tv on the red projector bulb was not working. all three guns red blue and green
Question about KP-46WT500 46" Rear Projection HDTV-Ready Television
KP-46WT500 Screen went blank When Sony TV gets problem it goes to standby as protection mode and LED start flashing. Do you see standby light blinking? There would be 3 seconds interval between blinks
Question about KP-46WT500 46" Rear Projection HDTV-Ready Television
...kp 46wt500 has 3d screen what might the problem be? If convergence out ICs got defective then TV shows that kind of picture. Replace IC8001 and IC8002 on D Board, both big black ICs are mounted on ...
Question about KP-46WT500 46" Rear Projection HDTV-Ready Television
...KP-46WT500 screen shows the tv image in blue only for a few seconds, then it goes completely blank (as if it were off). Do I need to replace the bulbs? It is rear projection TV that use 3 picture ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions