Questions & Answers for: kohler whirlpool tub turn

kohler whirpool tub will not turn on There is power to the box as it shares the box with the steam shower and that works fine. Nothing happens when the button is pushed Here is the manual for the tub.

kohler whirlpool will not shut off and sounds like about to blow my wife was taking a bath and turned on the jets. At first, the tub worked fine and then when she went to turn the tub off the button ...

Kohler K1338 spa tub controls messing up Kohler K1338 spa tub Back jets in the bottom position. If I turn up neck jet speed, that resets the back jets unless I press the down arrow on the neck jets ...

Kohler Whirlpool tub motor wont turn on I just finished using my jacuzzi tub and went to turn the jets off but they didn't turn off. I had to turn off electric panel. Anyone know what might have ...

...Kohler whirlpool tub it trips the wall switch. I changed the wall plug and it still trips when trying to turn it on. It has always worked fine. Any suggestions.. Remove the GFCI WALL OUTLET and try ...

...Kohler Whirlpool tub will not turn on. I tired the breaker and the reset button but still no luck. Would I just have an electrician check out the motor? a good electrican will check for power but may ...

...Kohler whirlpool started on its own with no water in it. We turned it off with the switch and it hasn't happened again. Is there a danger of it starting a fire if we are away from home and it does it ...

kohler bath whirlpool turns off after 1 second My kohler hot tub turns off after 1 second (repeatedly). Why won't it stay on?(I used bubble bath the last time it worked and did have a great deal of ...

Kohler Whirlpool tub motor problem. Turn motor on and trips GFI. It looks like the GFI is wired right and suggestions Unplug tub from GFI, does GFI hold, plug something else into GFI to see if it ...

...Kohler whirlpool. When I turn on the pump it leaks under the crawlspace. Hi, Most likely the seal at the pump shaft is bad and the water leaks out as the motor is running...this can be fixed by an ...