...1998 Ford Explorer 4.0 VIN e. We have changed the plugs, wires, fuel filter and pump, air filter and ran HEET and Lucas in the fuel system. The psi on the fuel gauge was 36 after putting the new pump ...
1998 Ford explorer v6 motor, i have replaced the timing chain and tentioners on the front of the motor but not knowing when the chain undone the timing slipped. I would appreciate if you could send me
...1998 exploer 4wd and im having problems statring it up. the motor crancks over. i can see the crank shaft and all the pulleys turn but the motor sounds like there is no combustion in the cylinders. i ...
...explorer restricted? The timing chain is broke, I wanted to know if the motor is restricted or non? If the engine was running and it broke this may be disastrous and you will need to split down and ...
...1998 ford 4.0 sohc v6 explorer sport 4wd. 148000 mi. can the timing chain GUIDES be replaced without pulling motor. ( all literature says no, I'll bet a savey ford tech does it with motor in vehicle. ...
1998 Explorer: how do i fix the timing belt... How do i fix the timing belt Remove your radiator, water pump, and anything else blocking the front of the engine. remove the timing belt cover and there
interval This vehicle shouldn't have a timing belt. Are you wanting to know about the timing chain? What engine size is it? It should be a 4.0 v6 but do you know if it is a OHV engine or a SOHC engine
...Explorer) Its the chain that runs the cam. The guides go bad and make it rattle like a son of a gun but will still seem to run okay. Stop running it, if the chain jumps your engine is shot. At the ...
Question about 1998 Ford Explorer Thermostat Housing Cooling Outlet Kit for V6 4.0L
know this doesn't help now, but I always get the timing marks close before removing anything, then when I line them up always turn forward or back just a little to get marks back in line. Never, never
Question about 1998 Explorer
...Explorer without removing the engine entirely and need to know what steps to take and what other parts that I will need to replace to get it working again. there is a lot to completing this job, your ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions