knock sensor/ O2 sensor 04 kia rio need to replace knock sensor/ O2 sensor, dont know location or degree of difficulty IT IS IN THE SIDE OF THE ENGINE BLOCK, SCREWED INTO THE WATER JACKET OF THE BLOCK
...knock sensor is located on a 2001 kia rio. need to replace knock sensor but dont know where its located on a 2001 kia rio. At center rear of engine compartment, by intake manifold support
knock sensor located on 2003 Kia Rio 2003 kia rio, It is located under the intake manifold. Get underneath the car, pull the oil filter...it is right above it and in clear view with the oil filter out
knock sensor po 325 is faulty on my 2001 kia rio. engine light came on as soon as mechanic removed head and did a valve job on my car....help have mech recheck the connection could have been ...
knock sensor replacement ....2003 kia rio....emissions ...obd II....failure...need to pass inspection...failure code P0325 (Knock sensor 1 circuit malfunction)....where vis the knock sensor located on
knock sensor replacement on 2004 kia rio HERE'S A LINK ON HOW TO REPLACE YOUR KNOCK SENSOR. ...
...knock sensor for 2003 rio kia On 2003 Kia Rio the knock sensor is located under the intake manifold and must be changed from underneath the car. If you remove the oil filter it is directly above it ...
how to install a knock sensor on a 2006 kia rio knock sensor replacement Might me here. knock sensor on 2006 kia rio YouTube
...knock sensor located on the engine of 2003 kia rio? Take off the air cleaner assy and on the back of the engine by the fire wall under the exhaust manifold you will see a wire coming up going to a ...
Question about 2004 Rio
...for a 04 Kia rio. It read the code P0325 (knock sensor)& P0101 (Mass Air Flow Circuit/Range performance problem) Neither of those codes depend on a bonding strap. Replace the MAF and the knock
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions