Questions & Answers for: kitchenaid problems refrigerators

nothing but problems with every KitchenAid product that I have ever owned. I will never purchase another KitchenAid product. All of there appliances are second rate. That is "The KitchenAid Difference

...frosty, and refrigerator section too warm This problem occurred four times and unit was replaced by Kitchenaid and problem remains after four years.. the freezer section is extremely cold, so cold it ...

...KitchenAid refrigerator model KSSC48QMS00. The evaporator fan runs 24/7. It did not do this for the past several years. The unit is in the kitchen in a fully air conditioned house. The unit makes ice ...

Kitchenaid Refrigerator dripping water I have a Kitchen Aid refrigerator: Model # KTRP19KGWH01, Type C19TFA98. The top back portion of the refrigerator drips water continuously. Both the refrigerator ...

KitchenAid Superba refrigerator door not closing My KitchenAid Superba refrigerator door is not closing properly. When you close the refrigerator door it is around 1/8" lower than the freezer door on ...

kitchenaid KTRS21KDAL refrigerator not cold but freezer is Hi, Check out these tips...they can help you figure out what is going wrong with your refrigerator and why it is not cooling Refrigerator not

Hi, I have a KitchenAid KSRB25FKSS02 and our refrigerator is not cooling and it is already set to the coldest setting, but our freezer is working just fine. This is a fairly common problem and is ...

I have a model # KBRS19KTMS1 KitchenAid fridge that is less than 1 year old. The problem I am having is that water is somehow forming on the bottom of the freezer causing a layer of ice. I also ...

...RIGHT NOW, cheaply and easily. We are specialized in fixing KitchenAid Refrigerators, we have factory parts with us and give 1 year warrant at least. Call 916 823 3070. Or Visit the

...Kitchenaid Refrigerator. Had no real problems getting the old line out. The problem now is trying to install the new one. I have tried feeding it from the bottom but it doesn't seem to want to go ...